Unraveling volatilomics profiles of milk products from diverse regions in China.

To distinguish Chinese milks from different regions, 13 milk samples were gathered from 13 regions of China in this study: Inner Mongolia (IM), Xinjiang (XJ), Hebei (HB), Shanghai (SH), Beijing (BJ), Sichuan (SC), Ningxia (NX), Henan (HN), Tianjin (TJ), Qinghai (QH), Yunnan (YN), Guangxi (GX), and Tibet (XZ). Headspace solid-phase microextraction coupled with gas chromatography-mass spectrometry (HS-SPME-GC-MS) combined with the electronic nose (E-nose) technology, was used to detect and analyze the volatile compounds in these milk samples. The qualitative and quantitative results identified 29 volatile chemicals, and we established a database of flavor profiles for the main milk-producing regions in China. E-nose analysis revealed variations in the odor of milk across different areas. Furthermore, results from partial least squares discriminant analysis (PLS-DA) and odor activity values (OAVs) suggested that seven volatile compounds: decane, 2-heptanone, 2-undecanone, 2-nonanone, 1-hexadecanol, 1-octen-3-ol, and (E)-2-nonenal, could be considered as key flavor compounds in Chinese milk products.

Tensile Behaviors and Mechanical Property Analyses of T-Welded Joint for Thin-Walled Parts in Consideration of Different TIG Welding Currents Using Multiple Damage Models and Fracture Criterions: Numerical Simulation and Experiment Validation.

In order to deeply investigate the tensile properties and fracture behaviors that are obtained by tensile tests of welded joints, constitutive and damage models are imperative for analyzing the tensile behaviors. In this work, the tensile tests are conducted on the T-welded joint specimens of aluminum alloy 6061-T6, which were cut from the T-welded joints of thin-walled parts under different welding currents of Tungsten Inert Gas Welding (TIGW). A modified Johnson-Cook (J-C) model based on the original J-C equation, Swift model, Voce model, and Hockett-Sherby (H-S) model, their linear combination model, and fracture failure model are constructed and applied to simulate tensile behaviors, combined with tensile test data. What is more, the finite element (FE) simulation of tension tests is executed with the VUMAT and VUSDFLD subroutines. Compared to those results simulated with different fracture criteria and tensile experiments, the tensile strength and yield strength of T-welded joint thin-walled parts under different welding currents were achieved, and their best mean errors were only about 1%. Furthermore, the accuracy of different fracture criteria is also evaluated by the correlation coefficient and mean squared error. The results show that the combination model can accurately predict the tensile properties and fracture behaviors of T-welded joints better than the single model, especially the results simulated with the Swift-H-S model and H-S-Voce model, which are in good agreement with tensile test results, which will provide an analysis foundation for enhancing the welding assembly quality and preventing fracture failure for complex thin-walled antenna structures.

Trade-offs between fertilizer-N availability and Cd pollution potential under crop straw incorporation by 15 N stable isotopes in rice.

Application of crop residues and chemical nitrogen (N) fertilizer is a conventional practice for achieving high yield in a rice system. However, the fallacious combination of N fertilizers with crop straw not only significantly reduces the N use efficiencies (NUEs) but also leads to serious environmental problems. The present study employed five treatments including no N fertilization and no straw incorporation (ck), N fertilization incorporation only (S0), N fertilization with 40% straw (S40), N fertilization with 60% straw (S60), and N fertilization with 100% straw (S100) to improve N use efficiency as well as reduced Cd distribution in rice. The crop yields were largely enhanced by fertilization ranging from 13 to 52% over the straw addition treatments. Compared with ck, N fertilizer input significantly decreased soil pH, while DOC contents were raised in response to straw amendment, reaching the highest in S60 and S100 treatments, respectively. Moreover, straw addition substantially impacted the Cd accumulation and altered the bacterial community structure. The soil NH4+-N concentration under S0 performed the maximum in yellow soil, while the minimum in black soil compared to straw-incorporated pots. In addition, the soil NO3--N concentration in straw-incorporated plots tended to be higher than that in straw-removed plots in both soils, indicating that crop straw triggering the N mineralization was associated with native soil N condition. Furthermore, the NUE increased with 15 N uptake in the plant, and the residual 15 N in soil was increased by 26.8% with straw addition across four straw application rates. Overall, our study highlights the trade-offs between straw incorporation with N fertilizer in eliminating potential Cd toxicity, increasing fertilizer-N use efficiencies and help to provide a feasible agricultural management.

Integrated glycolysis and pyrolysis process for multiple utilization and cadmium collection of hyperaccumulator Sedum alfredii.

Phytoremediation is a cost-effective and environmentally-friendly method to treat cadmium (Cd) contaminated soils, however, there is still a lack of safe disposal methods of harvested hyperaccumulators. In this study, by integrating glycolysis and pyrolysis, we investigated the possibility of bioproduct production and Cd collection from the hyperaccumulator Sedum alfredii. By means of acid-alkali pretreatment, the degree of cellulose polymerization was reduced by 36.24% while the surface accessibility was increased by 115.80%, resulting in a bioethanol yield of 9.29%. Meanwhile, 99.22% of total Cd of biomass could be reclaimed by collecting H2SO4-pretreatment waste. The saccharification residue was subsequently modified by NaOH-pretreatment-filtrate and converted into biochar at 500 °C which possessed a maximum Cd2+ sorption capacity of 60.52 mg g-1 based on the Langmuir model. Furthermore, sustainability analysis indicated that the economic input of this process is acceptable when considering its good environmental benefits. Taken together, our study provides a strategy for simultaneous bioethanol and biochar production during Cd collection from the hyperaccumulator S. alfredii, which could be a promising alternative for the suitable treatment of metal-enriched plants.

Cadmium accumulation in rice straws and derived biochars as affected by metal exposure, soil types and rice genotypes.

Straw residues, as one of the conservation farming practices, are being strongly encouraged in China, including some cadmium-polluted areas. Nowadays, a portion of this plant residue is promoted to be removed for reducing excess metal(loid) in the soil and to be used for bioenergy production. Nevertheless, the possible influences of contaminated straw or the burial of its derived biochars on Cd accumulation in soil and data based on health risk assessment associated with different status and extent of soil contamination were relatively unknown. Thus it is important to provide a more systematical understanding of contaminated straw burial at specific contamination zones, which may provide useful guidance for straw utilization. In this study, we harvested two genotypes of rice straw from 6 contaminated levels among three soil types to comprehensively study the total Cd contents in straws and its derived biochars and correlate the sets of straw characteristics and Cd contents in three different contamination zones. The total Cd concentration in straws grew at a steady rate relatively with increasing soil Cd contamination levels, compared to those in biochars which performed more fluctuate due to the strong burning. According to correlational analyses, three-way ANOVA showed that the moisture, ash, volatile and fixed carbon were all significantly affected by straw CdTotal contents (p < 0.001). Such relationships were attributed to guide straw removal portions for gasification. Meanwhile, there was a significant correlation between straw Cd concentration and soil types (p < 0.001), confirming that it might be worth determining soil remediation by straw removal according to site-specific farmland conditions. This work will help to assess efforts toward predicting Cd concentration in the paddy soils related to kinds of contamination status and would also give useful guidance to make sustainable management strategies for crop straws in polluted regions.Novelty statement This work provided data on how much rice straw is needed to remove to ensure the minimal amount to control soil contamination and reduce costs according to site-specific conditions and soil Cd contamination status. It also explains the correlations between straw characteristics related to bioenergy use and soil conditions which would give guidance to balance using crop straw for increased bioenergy production and the need to also protect, preserve, and enhance soil resources.

Effects of straw return with N fertilizer reduction on crop yield, plant diseases and pests and potential heavy metal risk in a Chinese rice paddy: A field study of 2 consecutive wheat-rice cycles.

Understanding the comprehensive effect on crop production and quality, soil acidification, and Cd accumulation and distribution for wheat-rice rotation under N fertilization and continuous straw return is important for proper contaminated agricultural soil management. A 2-year paddy field experiment was conducted to study the effects of above factors change in the Zhejiang province, China. Fertilization treatments included: conventional N fertilizer application (N3), 20% reduction of N application (N2), 40% reduction of N application (N1), combined with three portions of straw incorporation: all straws retention (N3), half of the straws into the fields (S2), 20% straws retention(S1). The N1 treatments significantly decreased crop yields compared to N2 and N3 treatments. Except for C2-wheat, soil pH generally decreased with increasing N fertilizer input in the order of N1>N2>N3, regardless of how many straws was amended. Moreover, we found that straw addition plus N fertilization had a intersystem impacts on Cd accumulation, distribution and availability. Although total Cd had different trends among 4 experimental seasons, when the N reduced 20% applied, the DTPA-Cd contents were lowest among 3 out of four experimental seasons, except for that of C2-wheat, where N2 treatments ranked the second lower contents. For most seasons, Cd contents in straws were higher than soils and lowest in grains, and S2N2 treatment performed an intermediate value among all treatments. Furthermore, our study demonstrated that S2 or N2 treatments or S2N2 reduced the potential risk of plant diseases and pests with lower disease index, disease cluster rate. Notably, the relative outbreak of pests was remarkably suppressed under S2 treatments, especially S2N2. Thus, these findings demonstrated that in wheat-rice rotation reducing 20% N fertilization with 50% straw returning may be a win-win practice in this region for the equilibrium between agricultural productivity, quality and low Cd polluted risk.

Double-edged effects of polyvinyl chloride addition on heavy metal separation and biochar production during pyrolysis of Cd/Zn hyperaccumulator.

Pyrolysis is a promising technique to achieve the sustainable utilization of heavy metal hyperaccumulator derived from phytoremediation of contaminated soils. To investigate the feasibility of synergistic treatment of hyperaccumulator and plastic waste (i.e. polyvinyl chloride, PVC), co-pyrolysis of Sedum alfredii and different mass percentages of PVC (5-25 wt%) was conducted at 300-900 °C in the present study. High pyrolysis temperature and low PVC addition amount (5 wt%) effectively promoted the volatilization of Cd and Zn from S. alfredii, while high PVC addition amount (15 wt% and 25 wt%) caused a significant suppression effect at insufficient pyrolysis temperatures. After PVC addition, the yields of biochar increased by 5.18-37.19% as compared with the theoretical values. However, the concentrations of Cd and Zn leached from biochar significantly elevated with increasing PVC addition amount, indicating that the addition of PVC improved the mobility of Cd and Zn in biochar. Moreover, S. alfredii derived biochars showed considerable sorption capacity for Cd (87.6-198.3 mg/g). These results imply that the addition of PVC has double-edged effects on heavy metal separation and biochar production during pyrolysis of Cd/Zn hyperaccumulator, and low PVC addition amount and sufficient pyrolysis temperature are beneficial for the further utilization of biochar.

A review on the thermal treatment of heavy metal hyperaccumulator: Fates of heavy metals and generation of products.

Phytoremediation is perceived as a promising technique for remediation of heavy metal (HM) contaminated soils, while the harvested HM-enriched hyperaccumulator biomass should be appropriately disposed. Recently, various thermal treatments of hyperaccumulator have drawn increasing attention. After thermal treatment, the hyperaccumulator was converted to bio-oil, bio-gas, biochar, or ash in accordance with the corresponding conditions, and the HMs were separated, immobilized, or trapped. The migration and transformation of HMs during the thermochemical conversion processes are critical for the safe disposal and further utilization of HM hyperaccumulator. This paper provides a systematic review on the migration and transformation of typical HMs (Cd, Ni, Mn, As, and Zn) in hyperaccumulator during various thermochemical conversion processes, and special emphasis is given to the production and application of targeted products (e.g. biochar, hydrochar, bio-oil, and syngas). Besides, future challenges and perspectives in the thermal treatment of hyperaccumulator are presented as well. The distribution and speciation of HMs were influenced by thermal technique type and reaction conditions, thereby affecting the utilization of the derived products. This review suggests that speciation and availability of HMs in hyperaccumulator are tunable by varying treatment techniques and reaction conditions. This information should be useful for the selective conversion of hyperaccumulator into green and valuable products.

Nobiletin selectively inhibits oral cancer cell growth by promoting apoptosis and DNA damage in vitro.

OBJECTIVES: The aim of this study was to investigate whether nobiletin (NOB) can inhibit the proliferation of oral squamous cell carcinoma (OSCC) cells by promoting apoptosis, oxidative stress (reactive oxygen species [ROS]), and DNA damage. STUDY DESIGN: OSCCs were treated with different concentrations of NOB (25, 50, and 100 µM) for different amounts of time (0, 24, 48, and 72 hours). The viability of NOB was assessed by using MTT-based cell viability assays. Flow cytometry was used to assess cell apoptosis, and the expressions of capase-3 and poly (adenosine diphosphate-ribose) polymerase (PARP) were assessed by quantitative real-time polymerase chain reaction (qRT-PCR) and Western blot analyses. The intensity of ROS fluorescence was measured by using a spectrophotometer. The expression of γH2AX and 8-Oxo-20-deoxyguanosine (8-oxodG) were assessed to determine the degree of DNA damage. RESULTS: We observed that NOB decreased OSCC cell viability in a dose- and time-dependent manner but had little effect on primary normal human oral epithelial cells (H0 ECs). Moreover, with the increase in NOB concentration and treatment time, capase-3, PARP messenger RNA (mRNA), and protein levels gradually increased, as did annexin V- and 7 adducin (ADD)-mediated apoptosis. In addition, NOB also increased the levels of ROS and DNA damage in a concentration- and time-dependent manner. CONCLUSIONS: NOB can inhibit OSCC cell by promoting apoptosis, ROS production, and DNA damage.

Effect of Preheating Treatment before Defatting on the Flavor Quality of Skim Milk.

Skim milk has a poor flavor due to the lack of fat. Finding ways to improve the flavor quality of skim milk has attracted the attention of more and more researchers. The purpose of this study was to create a skim milk product with good flavor by processing. Briefly, raw milk was treated by preheating at pasteurization (85 °C, 15 s) and ultra-high temperature (UHT) instantaneous sterilization (137-141 °C, 4 s). Subsequently, the sample was centrifuged to remove fat and obtain two kinds of skim milk, namely, PSM (skim milk obtained by preheating at 85 °C, 15 s) and USM (skim milk obtained by preheating at 137-141 °C, 4 s). The results showed that the intensity of the main sensory attributes (overall liking, milk aroma, etc.) and the concentrations of the key flavor compounds (2-heptanone, 2-nonanone, decanal, hexanoic acid, etc.) were significantly higher in the USM (p < 0.05) than that of the PSM and RSM (skim milk without preheating). Principal component analysis (PCA) with E-Nose (electronic nose) showed that the RSM had significant differences in the milk aroma compared with the PSM and USM. Furthermore, it was found that there were good relationships between volatile compounds and sensory attributes by partial least squares regression (PLSR) analysis. These findings provided insights into improving the flavor quality of skim milk by preheating treatment instead of any flavor additives.

Circulating miR-338 Cluster activities on osteoblast differentiation: Potential Diagnostic and Therapeutic Targets for Postmenopausal Osteoporosis.

MicroRNAs (miRNAs) are the most abundant RNA species found in serum, and recently, several miRNAs have been found to be associated with osteoporosis. However, the development of such associated miRNAs into diagnostic and therapeutic targets remains unaddressed, mostly because of a lack of functional validation. Here, we identified circulating miR-338 associated with postmenopausal osteoporosis, and performed functional validation in vivo and in vitro. Methods: We collected the serum from postmenopausal osteoporosis patients (N=15) and female volunteers of the same age but with normal bone density (N=15) and examined the enrichment of miR-338 cluster. We also confirmed such enrichment using mice subjected to ovariectomy at different stages. We employed primary bone marrow stromal cells from mice and the MC-3T3 cell line along with CRISPR, RNA-seq and ChIP-qPCR to validate the biological function of secreted miR-338 cluster on osteoblastic differentiation and their upstream regulators. Moreover, we generated miR-338 knockout mice and OVX mice injected with an inhibitor against miR-338 cluster to confirm its biological function in vivo. Results: We observed a significant enrichment of miR-338 cluster in postmenopausal osteoporosis patients. Such enrichment was also prominent in serum from mice subjected to ovariectomy and was detected much earlier than bone density decreases revealed by micro-CT. We also confirmed the presence of an estrogen-dependent Runx2/Sox4/miR-338 positive feedback loop that modulated osteoblast differentiation, providing a possible explanation for our clinical findings. Moreover, deletion of the miR-338 cluster or direct intravenous injection of an miR-338 cluster inhibitor significantly prevented osteoporosis after ovariectomy. Conclusion: Circulating miR-338 cluster in the serum could serve as a promising diagnostic and therapeutic target for postmenopausal osteoporosis patients.

Comparison of Sensory and Electronic Tongue Analysis Combined with HS-SPME-GC-MS in the Evaluation of Skim Milk Processed with Different Preheating Treatments.

It is well known that the flavor of skim milk is inferior to whole milk due to the lack of fat. With the popularity of low-fat dairy products, improving the flavor of skim milk is a main focus for food scientists. During the production of skim milk, preheating treatments have a significant effect for the flavor of skim milk. In this study, to explore the optimal processing conditions, milk was preheated at 30 °C, 40 °C, 50 °C, 60 °C for 30 min prior to defatting. When the optimal temperature was determined, milk was then preheated at the optimal temperature for 10 min, 20 min, 30 min, 40 min and 50 min, respectively, to obtain the best preheating time. Distinctions between skim milk samples with different processing conditions were studied by sensory evaluation, e-tongue and HS-SPME-GC-MS analysis. Principle components analysis (PCA) and cluster analysis (CA) were selected to associate with e-tongue results and compare the similarities and differences among the skim milks. Sensory and e-tongue results matched and both showed that a preheating temperature of 50 °C and 30 min time might be the optimal combination of processing conditions. Thirteen volatiles, including ketones, acids, aldehydes, alcohols, alkanes and sulfur compounds, were analyzed to evaluate flavor of the skim milks produced by different preheating treatments. Combined with previous studies, the results indicated that most volatile compounds were decreased by reducing the fat concentration and the typical compound 2-heptanone was not detected in our skim milk samples.

Influence of Processing Conditions on the Physicochemical Properties of a New-Type of Nutritional Drink-Millet Skim Milk Beverage.

In this experiment, a new type of nutritional drink-millet skim milk beverage-was developed based on combining skim milk with millet and nutritional resource utilization. The effects of NaHCO3 concentrations in soaking water (0, 0.5 g/100 mL, and 1.0 g/100 mL) and blanching time (0, 15, and 30 min) on the physicochemical properties of millet skim milk were studied. The parameter changes caused by the above treatment were evaluated via color analysis, physicochemical analysis and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Soaking in water containing NaHCO3 had a significant (p < 0.05) effect on pH, specific gravity, viscosity, and stability. The blanching treatment had a significant (p < 0.05) influence on the total solids of the samples. However, blanching only slightly affected the physical properties of the samples. In addition, soaking and blanching treatments had significant (p < 0.05) effects on the b* value of millet skim milk beverage, whereas there was no significant (p > 0.05) change in L* and a*. SDS-PAGE analysis indicated that the blanching treatment had a significant (p < 0.05) effect on band 5 and band 6 and that the soaking treatment also had a significant effect on the bands of 6 and 7 (p < 0.05). By analyzing the substantial effects, we concluded that the optimum process conditions were soaking with 0.5 g/100 mL NaHCO3 solution and blanching for 15 min.

[Discrimination of Lettuce Storage Time Using Near Infrared Spectroscopy Based on Generalized Fuzzy K-Harmonic Means Clustering].

Lettuce storage time is an important factor affecting the lettuce freshness. To realize the non-destructive, rapid and effective discrimination of lettuce storage time, generalized fuzzy K-harmonic means (GFKHM) clustering was proposed by introducing the pth power of Euclidean distance into fuzzy K-harmonic means (FKHM) clustering to replace the square of Euclidean distance in FKHM, and furthermore GFKHM was applied in the discrimination of lettuce storage time. Sixty fresh lettuce samples were prepared as the research object, and the near infrared reflectance (NIR) spectra of lettuces were collected by Antaris Ⅱ near infrared spectrometer with a spectral range of 10 000～4 000 cm-1 for three 12-hour detections. Firstly, the 1 557-dimensional NIR spectra were reduced by principal component analysis (PCA) to decrease redundant information. After the first 20 principal components were selected, PCA translated the 1 557-dimensional NIR spectra into the 20-dimensional data. Secondly, linear discriminant analysis (LDA) was used to extract the discriminant information from the 20-dimensional data to improve the clustering accuracy. With the first two discriminant vectors, LDA translated the 20-dimensional data into the two-dimensional data. Finally, the cluster centers from fuzzy C-means clustering (FCM) were set as the initial cluster centers for FKHM and GFKHM and fuzzy membership values of FKHM and GFKHM were calculated to identify lettuce storage time. The experimental results showed that the discrimination accuracy of GFKHM has achieved 92.5% which was higher than that of FKHM. The cluster centers of GFKHM were much closer to the true cluster centers in comparison with FKHM. Furthermore, the convergence of the GFKHM was significantly faster than FKHM. Near infrared spectroscopy coupled with GFKHM, PCA and LDA could cluster NIR spectra of lettuce quickly and correctly, and this provided a fast and nondestructive method for identifying lettuce storage time.